yes, i also use moblog. i refer to the “error pattern” that causes the issue. also, i have suggested installation access so you can check for yourself? let me know …
This is an archived forum and the content is probably no longer relevant, but is provided here for posterity.
The active forums are here.
April 09, 2010 3:35pm
Subscribe [9]#31 / Jun 13, 2010 2:25pm
yes, i also use moblog. i refer to the “error pattern” that causes the issue. also, i have suggested installation access so you can check for yourself? let me know …
#32 / Jun 13, 2010 2:36pm
Hi Thomas,
Is your moblog:check tag on the same template as the output from the channel assigned to Moblog?
Cheers
Greg
#33 / Jun 13, 2010 2:53pm
yes, greg.
#34 / Jun 14, 2010 6:22pm
Hi Greg,
Yes, the error still showed when posting something new to the moblog.
#35 / Jun 15, 2010 10:55am
code72, we’re going to concentrate on your issue first.
What I’ve done on one of my sites is to set up a moblog that I know works when clicking on the Check Moblog link in the control panel.
Next I’m adding
{exp:moblog:check which="howto" silent="false"}to my page to see what error I get.
And here is the result:
Moblog was successfully checked
Emails Retrieved: 1
Entries Added: 1
Attachments Uploaded: 1
Pings Sent: 0
After check moblog…
So how does my moblog differ from yours?
1. I didn’t restrict who could send the emails.
2. Very limited template.
If you test without the email restrictions, does it work?
#36 / Jun 16, 2010 2:56pm
Thank you for your patience, code72. We’re still looking into this.
#37 / Jun 18, 2010 10:48am
Moderator’s note: Split off secondary thread to here.
#38 / Jun 26, 2010 12:24am
Hey guys,
Sorry for the delay, this is obviously on my personal site, so it’s kind of down the priority list a bit. The template is already as simple as it could get I think, but I just removed the restriction on who could send the emails and I had a successful test. I’ll test again over the next few days and see what happens.
Sorry for dragging this on forever. Thanks for your help. I’ll keep you posted.
-John
#39 / Jun 26, 2010 3:20pm
Hi John,
No problem. We’ll be here 😊
Cheers
Greg
#40 / Jun 27, 2010 12:38pm
Bad news, the error showed again. I’m not sure what else to try.
#41 / Jun 28, 2010 4:00am
code72, ok let us review the situation and come back to you. Thanks for your patience
#42 / Jun 28, 2010 11:43am
Sorry for the delay, code72. It’s an api issue, meaning it has ramifications beyond the moblog itself. We’ve been bouncing around the core issue and have agreed on the approach to the fix, but it’s not completed yet. Since it’s most definitely a bug, could you go ahead and enter it in the bug tracker? It helps keep it consolidated and a developer will respond there once we have the fix in.
For the moment, you might want to hold off on the moblog tag unless it’s critical. It’s basically running into a permissions error in the entry api when attempting to add entries.
#43 / Jun 28, 2010 12:45pm
Reported here: https://support.ellislab.com/bugs/detail/12909/
Thanks for your help everyone.
#44 / Jun 28, 2010 3:34pm
Thanks for the bug report, code72. We appreciate it.